7 Ways to Learn How to Tile a Bathroom

Learning how to tile a bathroom might not seem important, but it is. If you can do your own tile work, you'll save hundreds of dollars on the cost of a professional tile setter. Laying your own bathroom tile requires some tools and skill, but it's not too hard for the average person to learn. All you need is dedication and a little practice. If you'd like to learn how to tile a bathroom, here are a few tips to help.

1. First, figure out how many tiles you'll need for the area you'll be tiling. This is a reliably simple process – measure a tile, then figure out how many will fit in the space along the top. Then, figure out how many fit along one side, and multiply the two. Add a few more tiles than this number, however. You may break some, or have miscounted, and having extra tiles is better than running out. Plus, some additional tiles can be kept on hand if one is ever damaged. Just replace the tile with a spare, and your bathroom will look as good as new.

2. Use a tile gauge to determine where your tiles should go. You can make one on your own – it's just a piece of wood marked with the positions of the tiles. When making the gauge, lay out tiles on a flat surface with spacers between them, and line up the tile gauge with them. Mark where the tiles lie, and you'll have your very own gauge.

3. Line up the center. Draw a vertical line down the wall in the location where your middle tile will be located. This allows you to tile outwards from this point, and to have a well lined up design.

4. Start at the bottom, not the top. Lay the tiles from the bottom up, and remember to use spacers, so that each tile is even laid.

5. For straight cuts, a tile cutting jig is invaluable. It'll help you cut individual tiles to the right size to fit in your bathroom. Curved tiles will require the use of a tile cutting saw.

6. Use grout to fill all gaps. Once your tiles have set, you can remove the spacers and fill in the areas between the tiles with grout. Use a waterproof bathroom grout to keep water from being trapped between tiles.

7. Seal everything well. Use silicone caulk or acrylic caulk to seal any gaps or seams between your tile and the tub, sink, or other fixtures. Run a damp finger along a bead of caulk to seal it.

If you learn how to tile a bathroom, you'll be able to have better control over your remodeling job, plus you'll save a lot of money. So, if you'd like to develop the skills for the job, research tile in depth and talk to an experienced tile setter for more information. You could be laying your own tile soon.